R. Prabhakaran, Barry H. Rabin, W. R. Lloyd, et al. (2012), Update on the Mechanical Properties of Fresh U Mo Fuels, TMS 2013 Annual Meeting & Exhibition (Accepted 2012).
Isabella J. van Rooyen, W. R. Lloyd, et al. (2012), Silicon Carbide CMC/Zircalloy 4 Hybrid Nuclear fuel Cladding Performance During 4 Point Tubular Bend Testing, International Symposium on Plasticity 2013 (Accepted 2012).
W. R. Lloyd, Barry H. Rabin, Lester Scott, and Adam Robinson (2012), Bend Testing of Irradiated AFIP 3 Fuel Plates, INL/MIS-12-25243.
Barry H. Rabin and W. R. Lloyd (2012), Feasibility Assessment of Direct Methods for Measuring Monolithic Fuel-Clad Interfacial Fracture Toughness, INL/MIS-12-24828.
Barry H. Rabin, Jill K. Wright, and W. R. Lloyd (2011), Evaluation of 6061 Al Alloy Mechanical Properties for Fuel Plate cladding, INL/MIS-11-24203.
J. H. Jackson, D. L. Porter, W. R. Lloyd, and N. Kisohara (2010), Fatigue Crack Analysis of EBR-II Nickel Bonded Duplex Tubing, Journal of Nuclear Materials 410 (1-3), pp. 76-83.
L. J. Carroll, W. R. Lloyd, J. A. Simpson, and R. N. Wright (2010), The Influence of Dynamic Strain Aging on Fatigue and Creep-Fatigue Characterization of Nickel-Base Solid Solution Strengthened Alloys, Materials At High Temperatures 27 (4), pp. 313-323.
Mark Carroll and W. R. Lloyd (2009), Baseline Graphite Initial Mechanical Test Report, INL/EXT-09-16868.
W. R. Lloyd (2004), ATR 40-Ton Crane Repair Assessment – Main Girder End Connector Assemblies, INEEL EDF-5049, Rev. 0, 28 July 2004.
W. R. Lloyd (2004), Test Results from Type 316L Weldments with Simulated Defects – Preliminary Results, INEEL EDF NSNF 041, Rev. 0, 18 June 2004.
W. R. Lloyd (2004), Assessment of Part-Through Defect Behavior in the Standardized DOE Spent Nuclear Fuel Canister Subjected to Accidental Drop Conditions, INEEL EDF NSNF 025.
W. R. Lloyd (2003), Microtopography for ductile fracture process characterization – Part 1: Theory and methodology, Engineering Fracture Mechanics 70, pp. 387-401.
W. R. Lloyd and F. A. McClintock (2003), Microtopography for ductile fracture process characterization – Part 2: Application for CTOA analysis, Engineering Fracture Mechanics 70, pp. 403-415.
